Streamline Measurement Ltd Rain drop
 
We can help you measure this!
HomeAbout UsProductsServicesNewsContact
   

 

 

RF416

 

RF416 2.4-GHz Spread-Spectrum Radio


Key Features

  • Replaces the RF415 Spread Spectrum Radio
  • Rugged, low-cost transceivers
  • 60 mW, 2.45 to 2.46 GHz frequency
  • Frequency-hops over 25 channels
  • Does not require an individual FCC license
  • Can be used in the field as a transceiver or in the office as the base station
  • Current drain can be as low as 1 mA (stand-by)
  • Transmits up to one mile with omni-directional antenna; up to ten miles with higher gain directional antennas
  • Settings stored in non-volatile memory

The RF416 spread spectrum transceiver has an operating frequency range of 2.45 to 2.46 GHz, which is used in many countries world-wide. The RF416 is a compact, rugged, low-cost transceiver intended for use in a variety of applications. It is ideally suited to use as a radio base station for a network of Campbell Scientifics CR200 radio data loggers.

The transceiver transmits at a power level of 60 mW and frequency-hops among 25 channels to avoid interference with other devices. This improves performance in environments where RF noise, pagers, and cellular phones could potentially reduce communication between devices. The RF416 may be used without an individual FCC license.

 

Specifications.

  • Available Protocols: Transparent, PB Aware, PB Node
  • Weight: 8 oz (227 g)
  • Dimensions: 4.9" x 2.8" x 1.2" (11.4 x 7.0 x 2.9 cm)
  • Operating Temperature Range: -25° to +50°C

 

 

 

Downloads

PDFManufacturers Datasheet

 

Download a copy of the latest Adobe Acrobat Reader, free from the Adobe Web Site.

Acrobat Reader

If you have problems opening this PDF page, the easiest solution is to save it outside the browser. Right-click the PDF link above and choose “Save Target As...” (or “Save Link As...”), then double-click the saved PDF to open it.

 
11 Hawthorn Bank, Glossop, Derbyshire, SK13 2EY, Phone: +44 1457 864334, Fax: +44 1457 854129,  sales@streamlinemeasurement.co.uk